Technical data: Non-woven fabric one side coated, smooth material

  • Composition: cellulose and synthetic fibers of polyester and viscose
  • Weight: 200 g/m2
  • Strip: 98 cm width
  • Glass fibre, heavy metals and PVC free
  • Easy application on the wall, easy removal; dry strippable
  • Flame retardant, Class C-s1, d0
  • Tested for harmful substances according to Oeko-Tex® Standard 100 Certification
  • Light resistant
  • Moisture resistant
  • Shock Resistant
  • Heat resistant
  • Crushproof, it does not expand

To clean, use a damp rag.
Made in Germany.

Technical data: Opalescent on non-woven material

  • Composition: cellulose, polyester, mica and mineral elements
  • Weight: 250 g/m2
  • Rolls: 92 cm width
  • Flame retardant, Class B-s2, d0 according to UNI EN 13501-1: 2009
  • Glass fibre, heavy metals and PVC free
  • Washability level: ‘spongeable’ according to British Standards BS EN 233
  • Easy to install, removable even when dry
  • Light resistant
  • Moisture resistant
  • Shock resistant
  • Heat resistant
  • Crushproof, does not expand
  • Apply the wallpaper glue directly on the wall: Adesilex MT32 (Mapei), Texreco N (ACM), Metylan Ovalit (Henkel)

To clean, use a damp sponge.
Made in Italy.

Techical data: Textile mural wallcovering non-woven fabric backed

  • Composition: 50% silk + 50% Fr-Trevira CS300 on non-woven material.
  • Weight: 300-355 g/m2 (min.-max.)
  • Strip: 137 cm width.
  • Flame retardant, Class B-s1, d0 without any flame retardant treatment
  • Light resistant
  • Shock resistant
  • Crushproof, it does not expand.

To clean, use a damp rag; use only clean water.
Made in Italy.

Technical data: Woven Vinyl on non-woven material

Top Layer: Woven Vinyl 90% PVC FR, 2% Polyester, 8% Glassfibery 1,3 mm.
Backing: Non Woven Backing 100% Polyester 0,4 mm.

  • Roll width: 98 cm
  • Thickness: 1,60 mm
  • Weight: 750 gr/m2
  • Chemical Resistance: EN 423, Class 0
  • Fire resistance: EN 13501, B-S1 d0
  • UV Resistance: IS0 105-B02, ≥Grade 8
  • Fungus test: ASTM G21 96, Grade 1
  • Skew and Bow: EN 427, Max 2%
  • Dimensional Stability: EN 434:1994, 0,05%
  • Curling: EN 434:1994, 1,5 mm

This wall decorative covering is specifically suitable in situation where the resistance to shock, wear and tear such as in corridors is of primary importance. The coating is waterproof, but in case of installation in a shower, it is necessary to use the Waterproofing Kit for the protection of digital prints (resins + wax idro).

Technical data: Embossed coated vinyl on non-woven material

  • Composition: coated vinyl on non-woven
  • Weight: 350/360 g/m2
  • Strip: 68, 5 cm with
  • Flame retardant, self-extinguishing Class 1 approved (B s2 d0)
  • Light resistant
  • It does not emit harmful substances, non-toxic, not subject to emission of heavy metals or formaldehyde
  • Washable, easy clean
  • Antistatic, antibacterial
  • Non-absorbent, non-permeable, Shock Resistant
  • Crushproof, it does not expand

This kind of material can be installed in shower areas with a special treatment. After the wallpaper installation on the walls, two coats of paint are required over the surface, using a flatting water-based epoxy coating, clear and matt.
To clean, use a damp rag and neutral soap.
Made in Italy.

Waterproof vinyl on non-woven material

Waterproofing Kit only for vynil non-woven and only for indoor application. The kit contains one resin pot (1 kg) and one spray wax (0,5 lt). In order to complete the treatment efficiently, please use two coats of resin and one coat of wax, for a total waterproofing effect.
RS 569 – Polyurethan mono-component Resin, matte and flexible.
Chemical composition: Aliphatic polyurethan water-based.

  • Non-yellowing, water-based resin
  • Coating of decorative holders on vertical surfaces made of non-woven vinyl
  • Humidity resistance
  • Outstanding resistance to alcohol
  • High tensile strength
  • Very good abrasion resistance
  • Application Temperature: From 10 °C to 30 ° C (Support temperature)
  • Duration: one year from purchase
  • Yield: 1 kg = 5,2 sq m
  • Solidification time: 1h at 20 ° C
  • Fireproof: BFL – S1 (EN 13501-1)

RS CARE – WAX IDRO – is a polyurethanical hydrorepellent wax that gives to the wallpapers a natural and waterproofing effect.
Chemical composition: water-based polyurethane resins.

  • Ideal for resin surfaces, brick stone materials, ceramics which are in continuous contact with external agents, so that the surface has a self-cleaning power with rain or water
  • It can be subjected to chemical and mechanical stresses
  • Application Temperature: From 10 °C to 30 ° C (Support temperature)
  • Fire resistance: not inflammable
  • Duration: best before one year from opening
  • Yield: 0,5 lt = about 62 sq m

Waterproof Application Steps
Preparation of the surface: The decorative fabric must be perfectly anchored to the surface. Make sure the glue used for the application is completely dry.
The surface must be dry, solid, stable and free of dust, dirt and other separators.
Pay attention: substrate’s and the environment’s humidity can delay the solidification and hardening.
Step 1 – Application Of The RS 569 Resin:

  • Always shake before use. Apply the first coat of polyurethane resin RS 569 with the special sponge or short-haired roller
  • Wait for about one hour and/or the complete drying of the material
  • Apply the second coat with the special sponge roller or short-haired, crossing the line with the application data first-hand
  • The total consumption of the two coats must exceed 200 gr/m2

Step 2 – Application of the Polyurethane WAX HYDRO:

  • Always shake before use. One hour after the second treatment of resins, when the surface is dry, apply the final layer of polyurethane matte
  • Apply WAX HYDRO using the specific spray on the treated part of the wall, standardizing it with a cloth in order to avoid product stash
  • Wait 24 h before applying water on the surface
  • The surfaces treated with WAX HYDRO must be kept and renovated by applying a new coat of the same product, once a year
  • For routine cleaning of treated surfaces, use mild detergents
  • Do not use abrasive rags or cloths

Temperature of the air and of the surface: between + 10 °C and + 30 °C
Air-relative moisture: max. 75%
You can find important tips about the application inside the data hardback.
RS 569 resin and WAX IDRO are free from flaws in components.
Since the methods of application and support affect the supply, the Company makes no warranties, express or implied, including the warranties of merchantability and suitability for different applications.
For reasons metioned above, the Company is not responsible for any loss or damage.